people_outline
Standards DataPhysics Instruments Logo

Standards

Due to the high accuracy of the DataPhysics Instruments measuring devices measurements can be performed complying with various differnt international standards. In the following you can find an excerpt of the standards that can be complied:

ASTM C813

Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

The following measuring devices are suitable for measurements complying with the ASTM C813-90:

to the standard

ASTM D724

Standard Test Method for Surface Wettability of Paper (Angle-of-Contact Method)

Note: The ASTM D724 has been withdrawn by the standards organisation ASTM International.

The following measuring devices are suitable for measurements complying with the ASTM D724:

to the standard

ASTM D971

Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method

The following measuring devices are suitable for measurements complying with the ASTM D971:

to the standard

ASTM D1331

Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials

The following measuring devices are suitable for measurements complying with the ASTM D1331:

to the standard

ASTM D1417

Standard Test Methods for Rubber Latices—Synthetic

The following measuring devices are suitable for measurements complying with the ASTM D1417:

to the standard

ASTM D1590

Test Methods for Surface Tension of Water and Waste Water

Note: The ASTM D1590 has been withdrawn by the standards organisation ASTM International.

The following measuring devices are suitable for measurements complying with the ASTM D1590:

to the standard

ASTM D5725

Standard Test Method for Surface Wettability and Absorbency of Sheeted Materials Using an Automated Contact Angle Tester

Note: The ASTM D5725 has been withdrawn by the standards organisation ASTM International.

The following measuring devices are suitable for measurements complying with the ASTM D5725:

to the standard

DIN 53593

Testing of latex; determination of surface tension

Note: The DIN 53593 has been withdrawn by the standards organisation Deutsches Institut für Normung (DIN) and is being replaced by DIN ISO 1409 (ISO 1409).

The following measuring devices are suitable for measurements complying with the DIN 53593:

to the replacement standard

DIN 53914

Testing of surface active agents - Determination of surface tension

Note: The DIN 53914 has been withdrawn by the standards organisation Deutsches Institut für Normung (DIN) and is being replaced by DIN EN 14370.

The following measuring devices are suitable for measurements complying with the DIN 53914:

to the replacement standard

DIN 55660

Paints and varnishes - Wettability

The following measuring devices are suitable for measurements complying with the DIN 55660:

to the standard

DIN EN 14210

Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method

The following measuring devices are suitable for measurements complying with the DIN EN 14210:

to the standard

DIN EN 14370

Surface active agents - Determination of surface tension

The following measuring devices are suitable for measurements complying with the DIN EN 14370:

to the standard

ISO 304

Surface active agents — Determination of surface tension by drawing up liquid films

The following measuring devices are suitable for measurements complying with the ISO 304:

to the standard

ISO 1409

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method

The following measuring devices are suitable for measurements complying with the ISO 1409:

to the standard

ISO 4311

Anionic and non-ionic surface active agents — Determination of the critical micellisation concentration — Method by measuring surface tension with a plate, stirrup or ring

The following measuring devices are suitable for measurements complying with the ISO 4311:

to the standard

ISO 6295

Petroleum products — Mineral oils — Determination of interfacial tension of oil against water — Ring method

Note: The ISO 6295 has been withdrawn by the standards organisation International Organization for Standardization (ISO).

The following measuring devices are suitable for measurements complying with the ISO 6295:

to the standard

ISO 6889

Surface active agents — Determination of interfacial tension by drawing up liquid films

The following measuring devices are suitable for measurements complying with the ISO 6889:

to the standard

OECD 115

Surface Tension of Aqueous Solutions

The following measuring devices are suitable for measurements complying with the OECD 115:

to the standard

Official Journal of the EC L251/37 A.5. (Volume 27)

Surface Tension

Note: The Commission Directive is no longer in force.

The following measuring devices are suitable for measurements complying with the Official Journal of the EC L251/37 A.5.:

to the standard